****Bottles supplied with labels appropriate for application*****
Shippers
Item
Qty
Prepaid/addressed plastic mailing containers
with enclosed 4
oz. bottle and label
Samplers
Item
Qty
Specialty Mfg. vacuum pump primarily supplied to sample from needle
valve ports. (Black anodized metal)
Tubing
Item
Qty
Polyethylene "hose/straws" for collecting liquids from dipstick
tube/storage containers/reservoirs. 36 inch lengths
Customers that have purchased pumps are provided with precut tubing with sample
bottles. Also available in 100 foot rolls in 1/4 inch or 3/16 inch
O.D.
ZincCheck
Item
Qty
Field test kit for detecting excessive zinc additive in "zinc free/EMD
type" engine oils. (checks 14 samples)
Field test kit for detecting excessive zinc additive in "Turbine Oil" (checks 14 samples)
Labels
Adhesive labels for identifying samples available in 3 main categories
Item
Qty
Vessel/Unit
primarily for boats, ships, trucks, heavy equipment, autos
Platform
for oil field use - Drilling rig/production platforms
Plant
for refineries, manufacturing plants, Power plants, storage terminals
Facilities:
1650 Airline Drive - Kenner, LA. 70062
Flash Points:
Lubriport performs several methods
Open
and closed cup,
from 32F to 700
F
Definition:
Flash points are run to determine volatility of petroleum products.
It is a measure of the
temperature to which a sample must be heated under specific conditions to
produce a flammable mixture of vapor and air.
Purpose:
Results of flash points can be used to detect contamination of fuels and
lubes. A reduced flash point and
viscosity on an engine lube suggests dilution with fuel, possibly caused by leaking
injectors, fuel lines, general poor condition of equipment, or improper operating
conditions. Low flash on a diesel or kerosene often caused by contamination with gasoline
during transport or storage.
New engine oils usually
flash above 400 F, some at over 500 F.
